WHARFEDALE
Wharfedale Pro WLA-210XP - IPX6 waterproof line array element
Wharfedale Pro WLA-210XP - IPX6 waterproof line array element
SKU:WLA-210XP
Couldn't load pickup availability
Phase PLugs
The two crafted phase plugs result in a more consistent frequency response off axis.
The design is usually unseen behind the grille…..but the impact these have on the system performance is stunning.
EVO-FOLD
The central 3.0″ HF compression driver is directly coupled to our EVO-Fold waveguide.
EVO-Fold reduces the usual phase issues that traditional 2-way line arrays have due to them having the drive units physically some distance apart in the array. The HF compression driver is loaded to a unique EVO-Fold horn. The EVO-Fold horn combines a unique folded and manifold design. The most advanced FEM technology has been used to create this.
The high-mid energy exits produce a uniphasic sound in the widest range of frequencies. And visually, the detail of the EVO-Fold waveguide is a work of art.
BI-AMP & PASSIVE MODES
In BI-AMP mode, two power amplifier channels can be used, one for each section of the loudspeaker (HF compression driver and LF transducers). DSP (Digital signal processing) is used to separate the audio signal into specific frequency bands for each amplifier channel, powering only the corresponding driver section inside the loudspeaker. This gives you the advantage of being able to select the optimal power specifications and use independent limiter and EQ settings for each driver, resulting in more granular system control and a safer, more efficient, and protected system.
In PASSIVE mode, a single amplifier channel can be used to power all drivers inside the loudspeaker. The full frequency range is put into the loudspeaker and the loudspeakers’ internal passive crossover separates the frequencies, delivering the right frequencies to the right driver. In the example of a 2-way passive loudspeaker, this means that the single amplifier channel is powering both the HF compression driver and the LF transducers. The internal crossover takes care of both the frequency and power separation.
The Wharfedale Pro Preset Library includes factory presets for both BI-AMP and PASSIVE modes, these must be used for optimal loudspeaker performance and protection.
TALKING OF AMPS.....
For maximum results, our DP-F and DP-N series of ampllifiers not only have downloadable presets for a WLA-210XP system, but these presets also include FIR filters
TALKING OF DSP .....
There are also downloadable presets for the SC-48 FIR processor.
Just download them here…..
Dual 10"
At the heart of the WLA-210XP are 2 x 10″ custom Wharfedale Pro LF drivers.
Designed and Engineered in the UK, they deliver the power to impress.
About the clarity
The HF compression driver delivers additional clarity and performance with enhanced definition.
It is custom made by Wharfedale Pro and is coupled to the EVO-Fold waveguide resulting in 100° x 10° dispersion.
Optional FLY FRAME
Arrays can be assembled using only WLA-210XP line array elements or with the WLA-210XSUB Subwoofers at the top of the array.
The WLA-210X Common Fly frame supports up to 12 x WLA-210XP elements and a WLA-210XSUB.
CLOSE up
Learn about the technical features of the WLA-210XP Line Array System
Optional WLA-210X
Common Fly Frame.
WLA-210XSUB
Dual 15” passive sub
makes a practical
and powerful system.
2400 W Programme.
1.5 mm steel grilles
protect the drivers inside
WLA-210XP
Dual 10"
passive array element
The 3.0” HF
compression driver
in each element is
directly coupled to the
EVO-Fold waveguide.
EVO-Fold waveguide
reduces the usual phase
issues that traditional
2-way line arrays have
due to them having the drive units
physically some distance apart in the array.
Custom Phase Plugs
deliver a wider and
more consistent mid-range
horizontal coverage and
better coupling between the
LF and HF
in the crossover area.
Custom Phase Plugs
deliver a wider and
more consistent mid-range
horizontal coverage and
better coupling between the
LF and HF
in the crossover area.
SPECIFICATIONS
| Model Name | WLA-210XP | WLA-210XSUB |
|---|---|---|
| System Type | Passive | Passive |
| Configuration | two-way | Dual 15” Subwoofer |
| Frequency Response (+/-3 dB) | 58-20 KHz | 39 Hz – 900 Hz |
| Frequency Range (-10 dB) | 50-20 KHz | 35 Hz -1.5 KHz |
| Sensitivity (2.83 v / 1 m) | 102 dB | 108 dB |
| Calculated Maximum SPL @1 m | 138 dB | 145 dB |
| System Rated Impedance | 8 Ω | 4 Ω |
| Low Frequency Transducer | ||
| Size | 260 mm / 10” | 2 x 381 mm / 2 x 15” |
| Voice Coil Size | 65 mm / 2.5” | 101.6 mm / 4” |
| Rated Impedance | 16 Ω X 2 (Parallel) | 8 Ω x 2 |
| LF Power (re:AES2-2012) | 2 x 400 W | 2 x 600 W |
| High Frequency Transducer | ||
| HF Driver Type | Compression Driver | |
| Voice Coil Size | 75 mm / 3” | |
| Exit Size | 1.4″ | |
| Diaphragm Material | Titanium | |
| Rated Impedance | 8 Ω | |
| HF Power (re:AES2-2012) | 90 W | |
| Nominal Coverage (H x V) | 100 H x 10 V EVO-Fold® | |
| Power | ||
| System Continuous Power | HF:90 W/LF:800 W | 1200 W |
| System Programme Power | HF:180 W/LF:1600 W | 2400 W |
| System Peak Power | HF:360 W/LF:3200 W | 4800 W |
| Crossover frequency | 1.5 KHz | – |
| Bi-Amp Mode Switch | Yes | |
| Input Connector | 2 x speakON | 2 x speakON |
| Hardware | 3 points Integral adjustable rigging 0°-10° |
Integral side plate non adjustable |
| Enclosure | ||
| Enclosure Material | 15 mm,18 mm plywood | 18 mm Plywood |
| Finish | TOUGH-TONE Paint | TOUGH-TONE Paint |
| Grille Material & Finish | steel | 1.2 mm Black Steel |
| Dimensions – (Unpacked) | ||
| Height Front | 314 mm / 12.4” | 485 mm / 19.1″ |
| Height Rear | 240.2 mm / 9.46” | 485 mm / 19.1″ |
| Width | 760 mm / 29.9” | 760 mm / 29.9″ |
| Depth | 504 mm / 19.84” | 716 mm / 28.2″ |
| Dimensions – (Packed) | ||
| Height | 404 mm / 15.9” | 575 mm / 22.6″ |
| Width Front | 855 mm / 33.7” | 850 mm / 33.5″ |
| Width Rear | 855 mm / 33.7” | 850 mm / 33.5″ |
| Depth | 594 mm / 23.4” | 806 mm / 31.7″ |
| Weight | ||
| Net Weight (kg / lbs) | 38.8 kg / 77.6 lbs | 63.0 kg / 138.4 lbs |
| Gross Weight (kg / lbs) | 41.3 kg / 90.9 lbs | 68.0 kg / 149.6 lbs |
